Product ID:ULTRA-GLO EPOXY HARDENER
MSDS Date:04/30/1986
FSC:8030
NIIN:00F027484
Kit Part:Y
MSDS Number: BQZPT

Emergency Phone: 707-443-9323

Info Phone: 707-443-9323

Cage: ENVIR

Telephone: 410-321-5200

Cage: ENVIR

EPOXY HARDENERS

Fraction By Weight: 100%

8.11

RTECS: 9999999WG

Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INGESTION: TOXIC, IRRITATION OR DAMAGE
TO DIGESTIVE TRACT. INHALATION: IRRITATION OF UPPER RESPIRATORY
TRACT. SKIN: CORROSIVE, DAMAGE W/BURNS & BLISTERING. EYES:
IRRITATION W/POSSIBLE PERMANENT EYE IN JURY.
Explanation of Carcinogenicity:NONE

First Aid:EYES: FLUSH W/PLENTY OF WATER FOR AT LEAST 15 MINS. SKIN:
WASH EXPOSED AREAS THOROUGHLY W/SOAP & WATER. RINSE WELL.
INGESTION: DON'T INDUCE VOMITING. INHALATION: REMOVE TO FRESH AIR.
IF NOT BREATHING, APPLY ARTIFICIAL RESPIRATION. OBTAIN MEDICAL
ATTENTION IN ALL CASES.

Flash Point Method:PMCC
Flash Point:>205
Extinguishing Media:DRY CHEMICAL, FOAM, CO2, WATER SPRAY
Fire Fighting Procedures:WATER/FOAM MAY CAUSE FROTHING. USE WATER TO
COOL FIRE EXPOSED CONTAINERS. IF LEAK/SPILL HASN'T IGNITED, USE
WATER SPRAY TO DISPERSE VAPORS/PROVIDE PROTECTION.

Spill Release Procedures:AVOID PERSONAL CONTACT. CONTAIN SPILL & WIPE
UP OR ABSORB ON SUITABLE MATERIAL & SHOVEL UP. FLUSH AREA W/PLENTY
OF WATER. PREVENT WASHINGS FROM ENTERING WATERWAYS.

Handling and Storage Precautions:AVOID CONTACT W/SKIN, EYES. USE
ADEQUATE VENTILATION. KEEP CLOTHING & SHOES CLEAN & FREE OF
CONTAMINATION.
Other Precautions:USE COMMON SENSE WHEN MIXING RESIN & HARDENER. AVOID
MIXING LARGE QUANTITIES OVER ONE GALLON AT A TIME. DON'T LEAVE
MIXED RESIN & HARDENER IN MIXING CONTAINER LONGER THAN 10 MINS AT
80F OR 15 MINS AT 70F.

Respiratory Protection:USE IN WELL VENTILATED AREA. NIOSH APPROVED
ORGANIC VAPOR RESPIRATORS ARE ONLY RECOMMENDED WHERE VENTILATION IS
NOT ADEQUATE.
Ventilation:MECHANICAL: RECOMMENDED. LOCAL EXHAUST: RECOMMENDED WHEN
APPROPRIATE TO PROTECT EMPLOYEES FROM EXPOSURE.
Protective Gloves:RUBBER OR POLYETHYLENE
Eye Protection:SAFETY GLASSES
Other Protective Equipment:CLEAN LONG SLEEVE & LONG LEG CLOTHING,
RUBBER/POLYETHYLENE APRON, AVAILABILITY OF RUNNING WATER
Work Hygienic Practices:REMOVE/LAUNDER CONTAMINATED CLOTHING BEFORE
REUSE. DISCARD CONTAMINATED SHOES.
Supplemental Safety and Health

Vapor Density:>1
Evaporation Rate & Reference:SLOWER THAN BU AC
Solubility in Water:INSOLUBLE
Appearance and Odor:CLEAR TO LIGHT AMBER LIQUID. SLIGHT PHENOLIC ODOR.
Percent Volatiles by Volume:NIL

Stability Indicator/Materials to Avoid:YES
ACIDS
Stability Condition to Avoid:EPOXY RESIN UNDER UNCONTROLLED CONDITIONS.
Hazardous Decomposition Products:CO2, CO, AMMONIA

Waste Disposal Methods:BURY IN APPROVED LANDFILL OR INCINERATE IN
FURNACE. CORROSIVE MATERIAL.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.